Ottoman & End Table Assembly Instructions
Partially Assembled for painted & unfinished
3 Parts
| Half rounds with 7 slats attached |
| 2 Angled Legs, right & left 10.5" |
| 6 1 5/8" screws |
| Tools Needed |
| Power Drill with Phillips Bit |
| Small bottle of wood Glue |
1
2
3
1/8" Space
Step 2: Turn footstool right side up and rotate legs so bottom of legs are horizontal with floor.
See End Table Below
middle screw only
Step 3: Turn footstool back on its side and fasten each leg with 2 other screws.
Step 1: Glue leg and screw ONE (1) screw in middle pre drilled hole on leg. Don't screw 2 outside screws yet. Leave a 1/8 space between top of leg and slat. Do both legs.
level to floor
If you would like to Print, Change printing preferences to LANDSCAPE so images will print correctly.
End Table & Jr. End Table partially assembled
Top/Apron Assembly
Lower Leg Brace Assembly
Four Legs
6 PARTS plus
Step 1: Turn top/apron assembly upside down as shown.
| Tools Needed: |
| Power Drill with Phillips Bit |
| Glue: Titebond Premium All Weather Glue |
| at Home Depot or Lowes |
Step 2: Glue and attach 4 legs in each corner of apron
Step 3: Glue & attach Lower Leg Brace Assembly 4 down from bottom of leg. For Jr. Table, the lower leg brace is 2 1/2 down from bottom of leg.
Photo & text copywrite 2006 garden furniture mill
Hardware: 16-1 5/8" screws
Finished
Change printing preferences to LANDSCAPE
4" down
©